SN54LVC540A, SN74LVC540A OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SCAS297G - JANUARY 1993 - REVISED JANUARY 1998

features

EPIC^TM (Enhanced-Performance Implanted CMOS) Submicron Process
Typical V_OLP (Output Ground Bounce) < 0.8 V at V_CC = 3.3 V, T_A = 25°C
Typical V_OHV (Output V_OH Undershoot) > 2 V at V_CC = 3.3 V, T_A = 25°C
Power Off Disables Outputs, Permitting Live Insertion
Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V V_CC)
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 250 mA Per JESD 17
Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Ceramic (J) 300-mil DIPs

EPIC is a trademark of Texas Instruments Incorporated.

description

These octal buffers/drivers are designed for 2.7-V to 3.6-V V_CC operation.

The 'LVC540A devices are ideal for driving bus lines or buffer memory address registers. These devices feature inputs and outputs on opposite sides of the package that facilitate printed circuit board layout.

The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1\ or OE2\) input is high, all outputs are in the high-impedance state.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN54LVC540A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LVC540A is characterized for operation from -40°C to 85°C.

Title: OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Product Family: INVERTERS
Device Functionality: OCTAL BUFFER/DRIVER
Orderable Devices: SN74LVC540ADBLE, SN74LVC540ADW, SN74LVC540ADWR, SN74LVC540APWLE

View the complete PDF datasheet: scas297g.pdf (88 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:SN74LVC540A

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.