Texas Instruments
SemiconductorsSearchFeedbackTI Home
Engineering Design CenterDSP SolutionsSC in the newsSC Product InformationSC Applications & TechnologiesSC Service & Support

Data Sheet Abstract

54ACT16861, 74ACT16861 20-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

SCAS197B - JUNE 1990 - REVISED NOVEMBER 1996


features

 

EPIC and Widebus are trademarks of Texas Instruments

description

The 'ACT16861 are noninverting 20-bit transceivers designed forasynchronous communication between data buses. The control-functionimplementation minimizes external timing requirements.

The 'ACT16861 can be used as two 10-bit transceivers or one 20-bittransceiver. They allow data transmission from the A bus to the B busor from the B bus to the A bus, depending upon the logic level at theoutput-enable (or ) inputs. The output-enable inputscan be used to disable the device so that the buses are effectivelyisolated.

The 74ACT16861 is packaged in TI's shrink small-outline package,which provides twice the I/O pin count and functionality of standardsmall-outline packages in the same printed-circuit-board area.

The 54ACT16861 is characterized for operation over the fullmilitary temperature range of -55°C to 125°C. The74ACT16861 is characterized for operation from -40°C to85°C.

 

 


Title: 20-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Product Family: STANDARD TRANSCEIVERS
Device Functionality: 20-BIT BUS TRANSCEIVER
Orderable Devices: 74ACT16861DL, 74ACT16861DLR

View the complete PDF datasheet: scas197b.pdf (104 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:74ACT16861

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

SemiconductorsSearchFeedbackTI Home
(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!