54ACT16827, 74ACT16827 20-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SCAS163A - JUNE 1990 - REVISED APRIL 1996

Please be aware that an important notice concerningavailability, standard warranty, and use in critical applications ofTexasInstruments semiconductor products and disclaimers theretoappears at the end of this data sheet.

features

Members of the Texas Instruments Widebus^TM Family
Inputs Are TTL-Voltage Compatible
3-State Outputs Drive Bus Lines Directly
Flow-Through Architecture Optimizes PCB Layout
Distributed V_CC and GND Pin Configuration Minimizes High-Speed Switching Noise
EPIC^TM (Enhanced-Performance Implanted CMOS) 1-m Process
500-mA Typical Latch-Up Immunity at 125°C
Package Options Include Plastic 300-mil Shrink Small-Outline (DL) Packages Using 25-mil Center-to-Center Pin Spacings and 380-mil Fine-Pitch Ceramic Flat (WD) Packages Using 25-mil Center-to-Center Pin Spacings

EPIC and Widebus are trademarks of Texas Instruments

description

The 'ACT16827 are noninverting 20-bit buffers composed of two10-bit sections with separate output-enable signals. For either10-bit buffer section, the two output-enable (1 and 1 or 2 and 2) inputs must both be low for thecorresponding Y outputs to be active. If either output-enable inputis high, the outputs of that 10-bit buffer section are in thehigh-impedance state.

The 74ACT16827 is packaged in TI's shrink small-outline package,which provides twice the I/O pin count and functionality of standardsmall-outline packages in the same printed-circuit-board area.

The 54ACT16827 is characterized for operation over the fullmilitary temperature range of -55°C to 125°C. The74ACT16827 is characterized for operation from -40°C to85°C.

Title: 20-BIT BUFFERS/LINE DRIVERS WITH 3-STATE OUTPUTS
Product Family: NON INVERTERS
Device Functionality: 20-BIT BUFFER/DRIVER
Orderable Devices: 74ACT16827DL, 74ACT16827DLR

View the complete PDF datasheet: scas163a.pdf (101 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:74ACT16827

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.