54ACT16863, 74ACT16863 18-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

SCAS162B - JUNE 1990 - REVISED NOVEMBER 1996

features

Members of the Texas Instruments Widebus^TM Family
Inputs Are TTL-Voltage Compatible
3-State Outputs Drive Bus Lines Directly
Flow-Through Architecture Optimizes PCB Layout
Distributed V_CC and GND Pin Configuration Minimizes High-Speed Switching Noise
EPIC^TM (Enhanced-Performance Implanted CMOS) 1-m Process
500-mA Typical Latch-Up Immunity at 125°C
Package Options Include Plastic 300-mil Shrink Small-Outline (DL) Packages Using 25-mil Center-to-Center Pin Spacings and 380-mil Fine-Pitch Ceramic Flat (WD) Packages Using 25-mil Center-to-Center Pin Spacings

EPIC and Widebus are trademarks of Texas Instruments

description

The 'ACT16863 are 18-bit noninverting transceivers designed forasynchronous communication between data buses. The control-functionimplementation minimizes external timing requirements.

The 'ACT16863 can be used as two 9-bit transceivers or one 18-bittransceiver. They allow data transmission from the A bus to the B busor from the B bus to the A bus, depending on the logic level at theoutput-enable ( or ) inputs.

The 74ACT16863 is packaged in TI's shrink small-outline package(DL), which provides twice the I/O pin count and functionality ofstandard small-outline packages in the same printed-circuit-boardarea.

The 54ACT16863 is characterized for operation over the fullmilitary temperature range of -55°C to 125°C. The74ACT16863 is characterized for operation from -40°C to85°C.

Title: 18-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Product Family: STANDARD TRANSCEIVERS
Device Functionality: 18-BIT BUS TRANSCEIVER
Orderable Devices: 74ACT16863DL, 74ACT16863DLR

View the complete PDF datasheet: scas162b.pdf (103 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:74ACT16863

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.