54ACT16240, 74ACT16240 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

SCAS137A - JULY 1989 - REVISED APRIL 1996

features

Members of the Texas Instruments Widebus^TM Family
Inputs Are TTL-Voltage Compatible
3-State Outputs Drive Bus Lines or Buffer Memory Address Registers
Flow-Through Architecture Optimizes PCB Layout
Distributed V_CC and GND Pin Configuration Minimizes High-Speed Switching Noise
EPIC^TM (Enhanced-Performance Implanted CMOS) 1-um Process
500-mA Typical Latch-Up Immunity at 125°C
Package Options Include Plastic 300-mil Shrink Small-Outline (DL) Packages Using 25-mil Center-to-Center Pin Spacings and 380-mil Fine-Pitch Ceramic Flat (WD) Packages Using 25-mil Center-to-Center Spacings

EPIC and Widebus are trademarks of Texas Instruments Incorporated.

description

The 'ACT16240 are 16-bit buffers or line drivers designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. These devices provide inverting outputs and symmetrical active-low output- enable (OE\) inputs.

The 74ACT16240 is packaged in TI's shrink small-outline package, which provides twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area.

The 54ACT16240 is characterized for operation over the full military temperature range of -55°C to 125°C. The 74ACT16240 is characterized for operation from -40°C to 85°C.

Title: 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Product Family: INVERTERS
Device Functionality: BUFFER/DRIVER
Orderable Devices: SNJ54ACT16240WD

View the complete PDF datasheet: scas137a.pdf (90 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:54ACT16240

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.