54AC16543, 74AC16543 16-BIT REGISTERED TRANSCEIVERS WITH 3-STATE OUTPUTS

SCAS125B - MARCH 1990 - REVISED APRIL 1996

features

• Members of the Texas Instruments Widebus ^TM Family
• 3-State True Outputs
• Flow-Through Architecture Optimizes PCB Layout
• Distributed V_CC and GND Pin Configuration Minimizes High-Speed Switching Noise
• EPIC ^TM (Enhanced-Performance Implanted CMOS) 1-m Process
• 500-mA Typical Latch-Up Immunity at 125°C
• Package Options Include Plastic 300-mil Shrink Small-Outline (DL) Package Using 25-mil Center-to-Center Pin Spacings and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center Pin Spacings

  EPIC and Widebus are trademarks of Texas Instruments Incorporated.

description

The 'AC16543 are 16-bit registered transceivers that contain twosets of D-type latches for temporary storage of data flowing ineither direction. They can be used as two 8-bit transceivers or one16-bit transceiver. Separate latch-enable ( or ) and output-enable ( or ) inputs are provided for each register to permitindependent control in either direction of data flow.

The A-to-B enable ()input must be low to enter data from A or to output data to B. Having low and low makes the A-to-B latchestransparent; a subsequent low-to-high transition at puts the A latches in the storagemode. Data flow from B to A is similar, but requires using the , , and inputs.

The 74AC16543 is packaged in TI's shrink small-outline package,which provides twice the I/O pin count and functionality of standardsmall-outline packages in the same printed-circuit-board area.

The 54AC16543 is characterized for operation over the fullmilitary temperature range of -55°C to 125°C. The 74AC16543is characterized for operation from -40°C to 85°C.

View more information about generic part numbers:74AC16543

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!