SN54ACT16244, 74ACT16244 16-BIT BUFFERS/LINE DRIVERS WITH 3-STATE OUTPUTS

SCAS116B - MARCH 1990 - REVISED APRIL 1996

features

Members of the Texas Instruments Widebus^TM Family
Inputs Are TTL-Voltage Compatible
3-State Outputs Drive Bus Lines or Buffer Memory Address Registers
Flow-Through Architecture Optimizes PCB Layout
Distributed V_CC and GND Pin Configurations Minimize High-Speed Switching Noise
EPIC^TM (Enhanced-Performance Implanted CMOS) 1-m Process
500-mA Typical Latch-Up Immunity at 125°C
Package Options Include Plastic Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) Packages, and 380-mil Fine-Pitch Ceramic Flat (WD) Packages Using 25-mil Center-to-Center Pin Spacings

EPIC and Widebus are trademarks of Texas Instruments

description

The SN54ACT16244 and 74ACT16244 are 16-bit buffers/line driversdesigned specifically to improve both the performance and density of3-state memory address drivers, clock drivers, and bus-orientedreceivers and transmitters. They can be used as four 4-bit buffers,two 8-bit buffers, or one 16-bit buffer. The devices provide trueoutputs and symmetrical (active-low) output-enable inputs.

The 74ACT16244 is packaged in TI's shrink small-outline package,which provides twice the I/O pin count and functionality of standardsmall-outline packages in the same printed-circuit-board area.

The SN54ACT16244 is characterized for operation over the fullmilitary temperature range of -55°C to 125°C. The74ACT16244 is characterized for operation from -40°C to85°C.

Title: 16-BIT BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
Product Family: NON INVERTERS
Device Functionality: 16-BIT BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
Orderable Devices: 74ACT16244DGGR, 74ACT16244DL, 74ACT16244DLR

View the complete PDF datasheet: scas116b.pdf (104 K Bytes) (Requires Acrobat Reader 3.x)

View more information about generic part numbers:74ACT16244, SN54ACT16244

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.