54ACT16244, 74ACT16244 16-BIT BUFFERS/LINE DRIVERS WITH 3-STATE OUTPUTS

SCAS116A - D3465, MARCH 1990 - REVISED APRIL 1993

features

• Member of the Texas Instruments Widebus^TM Family
• Packaged in Shrink Small-Outline 300-mil Packages and 380-mil Fine-Pitch Ceramic Flat Packages Using 25-mil Center-to-Center Pin Spacings
• Inputs Are TTL-Voltage Compatible
• 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers
• Flow-Through Architecture Optimizes PCB Layout
• Distributed V_CC and GND Pin Configurations Minimize High-Speed Switching Noise
• EPIC^TM (Enhanced-Performance Implanted CMOS) 1-um Process
• 500-mA Typical Latch-Up Immunity at 125°C
• Packaged in Plastic Shrink and Plastic Thin Shrink Small-Outline Packages and 380-mil Fine-Pitch Ceramic Flat Packages Using 25-mil Center-to-Center Pin Spacings

EPIC and Widebus are trademarks of Texas Instruments Incorporated.

description

The ŽACT16244 is a 16-bit buffer or line driver designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. This device provides true outputs and symmetrical G\ (active-low) output-enable inputs.

The ŽACT16244 is packaged in the TI's shrink small-outline package (SSOP), which provides twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area.

The 54ACT16244 is characterized for operation over the full military temperature range of - 55°C to 125°C. The 74ACT16244 is characterized for operation from - 40°C to 85°C.

View more information about generic part numbers:54ACT16244

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!