SCAS087A - APRIL 1993 - REVISED APRIL 1996
Please be aware that an important notice concerningavailability, standard warranty, and use in critical applications ofTexasInstruments semiconductor products and disclaimers theretoappears at the end of this data sheet.
m Process
EPIC is a trademark of Texas Instrumentsdescription
This device consists of bus transceiver circuits, D-typeflip-flops, and control circuitry arranged for multiplexedtransmission of data directly from the data bus or from the internalstorage registers. Enable GAB and G\BA are provided to control thetransceiver functions. SAB and SBA control pins are provided toselect whether real-time or stored data is transferred. The circuitryused for select control eliminates the typical decoding glitch thatoccurs in a multiplexer during the transition between stored andreal-time data. A low input level selects real-time data, and a highselects stored data. Figure 1 illustrates the four fundamentalbus-management functions that can be performed with the octal bustransceivers and registers.
Data on the A or B data bus, or both, can be stored in theinternal D flip-flops by low-to-high transitions at the appropriateclock pins (CAB or CBA), regardless of the select or enable controlpins. When SAB and SBA are in the real-time transfer mode, it is alsopossible to store data without using the internal D-type flip-flopsby simultaneously enabling GAB and G\BA. In this configuration, eachoutput reinforces its input. Thus, when all other data sources to thetwo sets of bus lines are at high impedance, each set of bus linesremains at its last state.
The 74ACT11652 is characterized for operation from -40°C to85°C.
View more information about generic part numbers:74ACT11652
Go to the Engineering Design Center to locate information on other TI Semiconductor devices.