TRF8010 RF POWER AMPLIFIER S-PARAMETER BOARD

The TRF8010 RF Power Amplifier S-Parameter Board documentation explains in detailed instructions the procedure for the S-Parameter board assembly. The PCB includes all necessary structures for a standard TRL calibration; including the 50 Ohm through line, short circuit, open circuit, and 50 Ohm load.

The calibration structures and the items on the test board are explained to ensure accurate calibration and measurements. To accurately characterize the TRF8010, the calibration kit must be defined in the network analyzer. A step-by-step process illustrates how the calibration kit is defined in the network analyzer using the HP8753 or other network analyzers such as the HP8510.

Go to the Engineering Design Center to locate information on other TI Semiconductor devices.

(c) Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!