The software consists of the following modules:

• TMS320 Source Debugger source code
  The standard window-, menu- and mouse-based TMS320 Debugger Interface is used with all Simulator, Emulator and SDB products including the C8x Simulator, C8x XDS510/XDS510WS Emulator and C8x SDB. The Debugger allows you to run and stop the processor; view and modify register, memory values and C variables; and view disassembly and C source.

• Open Target Interface (OTI) source code
  The OTI module is target and host processor independent. It is the highest level of the Open Target Interface Standard code (OTIS) which consists of OTI, PTI and SCIF. Its primary purposes are special condition handling, data/code management, and sequencing of PTI commands.

• Primitive Target Interface (PTI) source code
  PTI is a target specific level of OTIS. Its purpose is to provide the necessary low-level sequences to transact operations such as memory modify, run control, register access, etc.. The software interface is generic across target devices; however, the internal implementation is specific to a given target processor, such as the C8x.

• Serial Controller Interface (SCIF) source code
  SCIF, the lowest level of OTIS, provides a generic interface to the TBC IC. The internal implementation is about 90% generic. The remaining 10% customizes the hardware interface between the host and the TBC IC.

The software must be used with the following devices:

• Test Bus Controller IC (TBC)
  This IC translates SCIF data into MPSD scan information via register accesses made by the SCIF software. This IC must be in the system.

• TMS320C8x
  The actual target processor that is being scanned. The C8x MPSD port is connected directly to the TBC IC.

A license must be signed before the EPK can be purchased. If the resulting product built from the EPK source code is resold, a royalty must be paid to TI for each copy resold. The royalty varies depending on which portions of the code you use, how many copies you sell, and whether the product is an emulator or embedded system. Embedded systems are defined as those that include a TMS320 target processor. Emulators are defined as systems that use a target cable to interface with a remote TMS320 target system.